do i need silicon laboratories cp210x usb to uart bridge

If you are on a budget then get an inexpensive Texas Instruments CC2531 dongle (preferably with an external antenna) as that is compatible with ZHA and Zigbee2mqtt, alternatively you could get a more expensive but much more powerful CC2652 dongle. Regarding that it should be noted that the Husbzb-1 Zigbee have an older Zigbee chip inside it that is not very powerful and it is only compatible with ZHA in Home Assistant.įor Zigbee it depends if you plan on using ZHA, Zigbee2mqtt or DeCONZ. Most would at least argue that it is better to separately have one dedicated adapter for Zigbee and one dedicated adapter for Z-Wave as it gives you most flexibility and easier upgrade paths. Ever heard the expression “Jack of all trades, master of none.”? The Husbzb-1 is not the best Zigbee dongle and it is not the best Z-Wave dongle, and for the same amount of money you can get a separate Zigbee and Z-Wave adapter dongles. From the research I’ve conducted, I’ve found that the stick is running a Silicon Labs CP210x chipset, which is also used by other Zigbee/Zwave usb devices.įrancisp is correct that Husbzb-1 is the only compatible combo dongle available that supports both Zigbee and Z-Wave (and that the Z-Wave radio in Husbzb-1 is for North America only), but you also have to understand that the fact that there are no other combo dongles is not really a limitation, as if you think about it you will probably come to the conclusion that you do not want a combo adapter. I’ve been trying to get the Smartthings Link USB stick working on Openhab and Home Assistant. Please help me convince them to release these drivers SmartThings Community – 20 Nov 17 SmartThings Link (USB stick) on PC? I’ve posted a topic there with my findings. They informed me that the engineers occasionally hop on the forums there and help out. Hopefully they will be compassionate.ĮDIT2: I spoke with the Smartthings Support on the phone and they recommended I post in their community. If you could, please also email them asking. I think if we want to see a driver, they will need a lot more than me to convince them. I’ve emailed Samsung’s Smartthings support line, all but begging for a release. According to the Silicon Labs forums, the generic driver they provide should work for most devices UNLESS it was modified by the manufacturer. I’ve done a lot of research tonight, and I think we might be at a standstill. Hopefully someone there can offer some guidance.

I will be posting my findings on the Silicon Labs forums as they are the makers of the CP210x chipset. I haven’t had a lot of time to look into it, but I haven’t given up.

Do i need silicon laboratories cp210x usb to uart bridge